0 Cart

Your shopping cart is currently empty

Buy now

Mitsubishi Heavy Ceiling mounted air conditioning FDT50CR-S5 (2.0Hp)

  • Genuine nationwide warranty on site.
  • The selling price includes VAT and is committed to a genuine 100 percent NEW-WARRANTY NATIONWIDE
  • Free delivery within Ho Chi Minh City-fast installation, overtime installation as required. Support delivery and installation in the province.
  • 57 Song Hanh Street, An Phu Ward, District 2, Ho Chi Minh City (Open from 8am to 5pm, both Saturday and Sunday)
  • 32/28 No 35 St, Binh An Ward, District 2, Ho Chi Minh City, Vietnam (Open from 8am to 5pm, both Saturday and Sunday)
  • Mitsubishi Heavy Ceiling mounted air conditioning FDT50CR-S5 (2.0Hp)
  • dienmaygiagoc.com
  • may_lanh_mitsubisshi_heavy%20(4).jpg
  • may_lanh_mitsubisshi_heavy%20(3).jpg

Mitsubishi Heavy Ceiling mounted air conditioning FDT50CR-S5 (2.0Hp) images review

Description

Table of contents

Ceiling cassette 4 way FDT-CR

This type of air conditioner is one-way cooling only, non inverter and uses gas R410A protecting the natural environment.

It is a cheaper product than the 2-way inverter air conditioner, but is designed with the same convenient functions.

4_huong_gio_am_tran_mitsubishi_heavy

Flap Control System

Flap can swing within an upper and lower flap range position within can be selected with a wired remote control.

The remote controller and RCH-E3 is not applicable to the Individual flap control system.

700mm Drain Pump

Drain can be discharged upwards up to 700mm from the ceiling surface, allowing a piping layout with a high degree of freedom. Thanks to the 260mm flexible hose, equipment supports easy workability.

Easy check of drain pan

Remove corner lid. Remove drain cap cover and check the condition. It is necessary to clean-up, firstly remove the rubber stopper to drain water out and secondly remove the drain cap. Clean up the area around the drain pump port.

Balance the indoor unit when installing

A balanced indoor unit installation can perform without removing the panel by checking the access doors with removable covers at each corner of the machine. It helps to improved operability and significantly reduced installation times.

Diversity Strength

Mitsubishi Non-Inverter ceiling air conditioner has 4 types of capacity: FDT50CR-S5 - 17,060 Btu, FDT71CR-S5 - 24,255Btu, FDT100CR-S5 - 34,120Btu, FDT125CR-S5 - 42,650Btu.

Remote control (option)
dieu_khien_mitsubishi_heavy

Specifications

Specifications Mitsubishi Heavy Ceiling mounted air conditioning FDT50CR-S5 (2.0Hp)
General information
Origin Brand: Japan - Made in: Thailand
Gas R410A
Type Mono - 1-way type (cooling only)
Cooling capacity 2.0 Hp - 17.060 Btu/h
Using for rooms Area 24 - 27 m² or 72 - 81 m³ (suitable for living room, office)
Power source (Ph/V/Hz) 1 phase, 220 - 240V, 50Hz
Electricity consumption 1,613 kW
Refrigerant/ Liquid Pipe Diameter (mm) 6.35 / 15.88
Maximum Pipe Length (m) 30 (m)
Maximum Elevation Length (m) 10 (m)
Energy Efficiency Ratio (EER) 3.1 (COP)
In door unit
Model Name FDT50CR-S5
Dimensions (H x W x D) (mm) 246x840x840 (mm)
Weight (Mass) (Kg) 22 (kg)
Panel
Panel Dimensions (mm) 35x950x950 (mm)
Panel Net Weight (Kg) 5.5 (kg)
Outdoor Unit
Model Name FDC50RC-S5
Dimensions (H x W x D) (mm) 640 x 850 x 290 (mm)
Weight (Mass) (Kg) 40 (kg)
Area and air volume calculated by room in ideal conditions, closed room, concrete wall, good insulation, no direct ventilation wc, washbasin...
Mitsubishi Heavy Ceiling mounted air conditioning FDT50CR-S5 (2.0Hp)

Mitsubishi Heavy Ceiling mounted air conditioning FDT50CR-S5 (2.0Hp) review

Viewed Products
Top selling products