How to use the Samsung air conditioner NVFXAWKNSV controller

This manual applies to AR10NVFXAWKNSV, AR13NVFXAWKNSV, AR18NVFXAWKNSV, AR24NVFXAWKNSVproducts.

How to determine the type of air conditioner

You can find the product code of the air conditioner you're using by looking at the machine's box or the energy label stamp on the heater.

Overview of features on the remote

Basic modes

How to turn on/off

- Press the "Power" button to start the machine.

- Press "Mode" to select the operating mode. When the words "Auto" are displayed, it is in automatic mode; "Cool" for cooling, "Dry" for drying, "Fan" in fan mode and mode. Heating is "Heat."

• Auto mode ("Auto"): The machine will automatically adjust the appropriate temperature.
• Cooling mode "Cool": normal cooling mode can adjust more features than Auto mode.
• Dry mode "Dry": no cooling helps create a dry space, especially in rainy or humid weather.
• Fan mode "Fan": No cooling; only the fan rotates to generate cool air. The capacity is equivalent to a regular fan.
• Heating mode "Heat": a heating function that can only be used on 2-way air conditioners.

- Press the "Power" button again to finish.

How to change or set the temperature

To change the temperature, you press "Temp," "+," or "-."

Temperature change button on the remote

You can control the temperature in each mode as follows:

User-friendly temperature control panel

Note:

- You can switch between Celsius (Celsius) and Fahrenheit (Fahrenheit) on the remote by pressing the "SET" button for about 3 seconds.

- Auto mode "Auto," cooling mode "Cool," and heating mode "Heat" adjust to the same temperature.

- In "Fan" mode, the temperature cannot change.

Change the fan speed

You can adjust the fan speed to increase comfort.

Press the "Fan" button on the remote to start setting and changing the wind speed. You can choose from the following fan speeds:

The table below describes the fan speed on the display of the remote.

Note:

- If the air conditioner has not been used for a long time, you should let it operate in Fan mode for 3 or 4 hours to dry the machine.

- Cooling mode "Cool" and heating mode "Heat" are similar.

Adjust the wind direction

You can stop the movement of the louvers and adjust the cold air to blow directly at or toward the ceiling as you like.

The button to adjust the wind direction on the remote

- During operation, press "Swing" until the propeller starts to rotate.

- When the propeller rotates to the desired position, press "Swing" again. The propeller will stop.

- To adjust manually, you can use your hand to hold the knob on the blades and then move the airfoil in a fixed horizontal direction.

Quick cooling for comfort

Two-step cooling mode

The 2-step cooling function will bring a relaxed feeling quickly. After that, the machine will automatically switch to a comfortable and comfortable cooling mode when it is cold enough. This mode is a combination of fast and comfortable.

On the remote, the icon for the two-step cooling mode is visible.

- In the "Cool" cooling mode, press the "Options" button continuously or use "to select the "2-Step" fast cooling mode.

- Select "SET" to complete the setup.

Wind-free cooling mode

This lets you enjoy comfortable, gentle cool air emanating from the micro-holes on the air-cooled cooling pad when the louvers are closed instead of directly feeling the cool breeze.

To turn on the wind-free cooling function, press the wind-free button on the remote.

The remote's Wind-Free Cooling Mode button

Note:

- You need to press the Wind-Free button again to cancel the function.

- The wind-Free function can use while operating modes: cooling "Cool," drying "Dry," or fan "Fan."

Fast cooling mode

To cool your room quickly, you can choose the fast cooling mode. This function is the most powerful cooling function of the machine.

The "Fast" cooling mode icon appears on the remote.

- In "cool" cooling mode or "heat" heating mode, you press the "Options" button on the remote.

- Use "<>" to select "Fast" cooling mode.

- Select "SET" to complete the setup.

Note: The disadvantage of this fast cooling mode is that it will consume more electricity than other modes because the machine works at its maximum capacity to cool your room quickly.

Comfortable blowing function (Comfort)

You can choose a comfortable blowing mode to feel the cold air gently.

The Comfortable Comfort blowing function icon is displayed on the remote.

- In cooling mode, press the "Options" button.

- Use "<>" to select the comfortable cooling mode "Comfort."

- Press "SET" to complete the setup.

Quiet function (Quiet)

To reduce the operating sound of the machine to help you fall asleep, you can activate this Quiet function.

The icon for the quiet functionQuiet is displayed on the remote.

- In "Cool" cooling mode or "Heat" heating mode, press the "Options" button on the remote.

- Use "<>" to select the quiet mode "Quiet."

- Select "SET" to complete the setup.

Check the power consumption when the machine is operating

It helps you check the total electricity consumed by the air conditioner. The amount of electricity consumed will display on the indoor unit screen for a few seconds, and the room temperature will appear.

The icon to check the power consumption is displayed on the remote

To check, you press the "Options" button.

- Use "<>" to select the "Usage" power consumption test function.

- Select "SET" to see power consumption.

Note:

- Electricity consumption is calculated from the time the air conditioner is turned on. When you turn off the air conditioner, this mode will turn off and must be operated from the beginning to see.

- Only view the power consumption when the machine is operating.

Single-user function

Single user mode to reduce consumption and help save power most optimally.

Single-user function button on the remote

- In "Cool" cooling mode, press the Single User Mode button on the remote.

- Or you can press the "Options" button and use "<>" select "Single user" mode. Finally, press the "SET" button to complete the setup.

- To turn off this mode, press this Single User Mode button again.

Set timer

Adjusting the timer

- Press the "Timer" button on the remote, then select "On." Use "<>" to increase or decrease the amount of time to turn on the machine automatically.

- Press "SET" to complete the setup.

- Timer to turn off automatically: press the "Timer" button and select "Off," and do the same with the appointment to turn on the machine automatically.

- To cancel the timer on/off function, set the interval to 0.0.

- Adjustable for up to 24 hours. Increase the time from 0 to 3 hours by 0.5 hours per press. From 3h onwards, increase by one h per press.

Adjust the timer for good sleep (Good 'Sleep)

You can choose Good Sleep to sleep better at night.

- Press the "Timer" button about three times until the Good Night Mode icon appears on the screen.

- Use "<>" to set the timer on/off.

- Press "SET" to complete the setup.

- To cancel the timer on/off function, set the interval to 0.0.

- Adjustable for up to 12 hours. Increase the time from 0 to 3 hours by 0.5 hours per press. From 3h onwards, increase by one h per press.

Note: Goodnight mode is only available in "Wind-Free" mode.

Timer for combined automatic turn off

Three hours later, you want the machine to turn on by itself. And it turns itself off 2 hours later. So there will be 2 cases:

• When the air conditioner is off, the air conditioner will automatically turn on after 3 hours from the time you set the timer, and the machine will run for 2 hours and then turn itself off.
• When the air conditioner is on: From the time of installation, after 2 hours, the machine will automatically turn off. And after 3 hours, the engine will automatically run again until you set the timer again.

Set the indoor unit to self-drying mode

- When selecting Clean mode, after the air conditioner is turned off, the fan in the indoor unit will continue to rotate for about 10 minutes to dry the indoor unit, preventing mold from accumulating in the indoor unit for a long time.

- After that, the machine will automatically turn off.

To set up this clean function, you will have two ways:

Method 1: Press the "Options" button for about 3 seconds to activate.

Method 2: Press the "Options" button, then use the button "<>" to select the flashing "Clean" word, then select "SET" to activate the function.

The above article guides the primary usage that dienmaygiagoc.com.vn would like to introduce to users of the Samsung NVFXAWKNSV series of air conditioners. Hopefully, users can use the product most optimally with these instructions.