Mitsubishi Heavy ceiling mounted air conditioning FDT71VG/FDC71VNP inverter (3.0Hp)

Panel design with more flexible wind control blades

The Mitsubishi Heavy ceiling mounted air conditioning FDT71VG/FDC71VNP inverter (3.0Hp) has an airflow control panel that provides comfortable airflow throughout the room. Whether cooling or heating, the remote controller can easily control the vane. It helps the air to be spread more evenly throughout the room.

Mitsubishi Heavy ceiling air conditioner received the "Good Design Award 2016" in Japan. It is a global design award with the participation of many companies and organizations from Japan and internationally.

The robust operation, quiet operation

Mitsubishi Heavy ceiling mounted air conditioning FDT71VG/FDC71VNP inverter (3.0Hp) operates powerfully with a cooling capacity of 24,200 Btu/h (room area 35 - 40 m² or 100 - 115 m³). Besides, the machine runs quietly and achieves maximum efficiency, minimizing electricity costs with low power consumption at 1.52 kW.

Independent air swing control system

Depending on room conditions, the wind direction is independently controlled in 4 tips by a separate vane control system from the Mitsubishi Heavy ceiling air conditioner. In addition, the spoiler can prevent from high to low position independently (wireless control does not have this function).

Airflow control plate (optional) prevents cold/hot air from blowing directly on people. The airflow can adjust individually for each wing.

Drain pump 850mm

The drain pump is pre-assembled with a lift of 850mm from the ceiling surface, allowing for a more straightforward exhaust system layout. Depending on the installation location, a 185mm soft hose, standard accessory, aids in easy operation.

The drain pan is quickly inspected by removing the corner cap

With the new design, it can quickly check by dragging the corner cover so that checking the condition of the water pump is easy without removing the panel. The locating of the drain hole of the water trough is easy and convenient.

Save energy thanks to the User's Motion Detection Sensor

Power control

A new motion sensor (optional) that detects user activity. Control energy saving by changing the set temperature according to the number of users during operation.

Automatic shutdown

When the sensor detects no user activity for 12 consecutive hours, the Air Conditioner will automatically shut down, stop working.

Easy installation

With the modern and advanced design from the Mitsubishi Heavy ceiling air conditioner, the installation quickly without spending too much effort.

Quieter operation

With the newly applied technology, it helps to reduce noise generation most effectively. In addition, quieter operation by adjusting the fluctuating pressure of the indoor unit.

Use Gas R410A

Contributing to reducing the negative impact on the surrounding environment.

Balance the indoor unit when installing

A balanced arrangement of the indoor unit installation can make without removing the panel by inspecting the access doors with removable covers at each corner of the unit. Improves operability and significantly reduces installation time.

Specifications

Note:

Conditional Measured Parameters (IOS-T1)

Cooling: Room temperature 27 ̊CDB, 19 ̊CWB, and outdoor temperature of 35 ̊CDB. Heating: Room temperature 20 ̊CDB and outdoor temperature 7 ̊CDB, 6 ̊CWB.

* Indicators obtained in the laboratory. During operation, these stats will change higher due to ambient conditions

** Indicators only apply when operating 1 indoor unit

*** If a cooling operation is carried out when the outdoor temperature is -5ºC or below, the outdoor unit must be installed in a place that is not affected by natural wind. If the wind blows, the low pressure will drop, and the compressor frequency will increase, which reduces capacity and can cause damage to the machine.