Toshiba Daiseikai air conditioning inverter (2.0 Hp) H18N4KCVPG-V

Magic Coil Technology

The new generation of Inverter air conditioners with an especial coating Magic Coil prevents dirt, bacteria, and mold from sticking to the outside of the indoor unit during operation to help the air conditioner operate more optimally, airflow cleaner, and more durable.

The effects of Magic Coil Technology with a special coating

An air conditioner is anti-fouling keeps aluminum foil clean, anti-mold, health protection, creating a clean and fresh atmosphere.

Optimal power saving.

Reduce maintenance costs as well as the number of machine cleaning times.

Plasma ion air purification technology

1. Anti-mold filter

It is the first step of protection and the high-efficiency sieve filters out dirt in the air.

2. The process of creating an ion plasma

3. Heat exchange system with Magic Clean Air technology

The heat exchanger will absorb and remove dirt through the drain. This mechanism can absorb microscopic dust particles that cannot be filtered by the filter.

Cleaning process with Magic Clean Air coating:

• Daiseikai's innovative manufacturing is an especial synthetic plastic coating on the aluminum foil heatsink device.
• Not only does this application eliminate debris, but the aluminum foil device stays clean, increases the reliability of heat transfer, and decreases the number of cleaning times required.

4. Ionization system

Ionization system

An especial synthetic plastic coating on the aluminum foil heatsink system is Daiseikai's advanced technology.

Negative ions absorb microscopic dust particles

Negative ions cling to odor molecules, smoke, bacteria, etc.
Negative ions inactivate odor molecules, smoke, bacteria, etc.

Creates humidity

1. The tiny hydroxide (OH) molecules in the ionization process of chemicals and soil have surrounded by H2O water molecules.
2. Hydroxide (OH) molecules will absorb the Hydrogen (H) of bacteria, making the bacteria paralyzed and ineffective.
3. Inactive bacteria converted to H2O. This H2O molecule will spray back out to create moisture for a clean, fresh and fresh environment.
4. Skin moisture increases by 10%, elasticity increases by 7%. Your whole skin will be cared for and protected by the ionizing system.

Self cleaning

This feature is built-in to dry the humidity. It has accumulated in the machine, eliminating the cause of mold.

Once turned off, the fan will operate for 20 minutes to dry the remaining moist air. It helps to prevent mold from forming.

Hybrid Inverter technology

An inverter is the conversion of alternating current at one frequency into alternating current at another adjustable frequency. Therefore, Inverter technology can change the most suitable power capacity to save energy. It achieves the highest working efficiency of the device.

Toshiba Hybrid Inverter technology integrates two separate control modules to bring many benefits:

• Always guarantee natural comfort.
• Help to shorten room cooling time.
• Save more energy when the compressor does not have to restart.
• Quiet operation and quick are optimum energy efficiency.

Inverter compressor with DC - Twin Rotary technology

Twin ‐ Rotary: Brings high efficiency, quiet compressor operation, and cooling operation:

• Minimal friction reduction, quiet operation with low noise and vibration are suitable for noise-sensitive locations.
• Energy-saving (low rotation speed - less than 30 rpm): two cranks simultaneously help the compressor shaft rotate accurately, with less energy loss.
• High reliability (low spindle load).
• Use cold gas R32.

DC - Twin Rotary motor: High efficient motor saves energy.

Crank: Optimize structure and layout. It improved cross-section and styling efficiency for reduced noise.

Active capacity options

Daiseikai proactively saves energy optimally at three levels of engine capacity:

The machine works at standard rates.

Save more energy when the machine is operating at 75% of operating capacity.

Save more energy when the machine is operating at 50% of operating capacity.

• Active energy control helps prevent overloads that cause unwanted power outages.
• When working at 50% of the rated current, the compressor works more quietly and cuts down on the noise pollution, extending product life.

Eco mode

Press the ECO button while cooling, heating, or in auto mode, the fan speed automatically controlled, and the air conditioner operates as below:

• Cooling: The set temperature will increase by 1˚C after 1 hour and then 1˚C after 2 hours and maintain until shutdown.
• Heating: The set temperature will drop 1˚C after 1 hour and then 1C again after 2 hours and maintain until shutdown.

The ECO mode achieves up to 25% less energy than standard settings without sacrificing the comfort of your home.

(**) Measured results at TOSHIBA Thailand laboratory (TCTC).

3D multidimensional cold air

• Absolute relax with 3D multidimensional cold air.
• Flexible operation.
• Multidimensional air blowing with six different air blowing paths.

Hi Power mode

Automatically controls room temperature and airflow for faster cooling.

Just press on the "Hi-POWER" button.

• The adjusted temperature drops 3ºC lower than the set temperature. Settings on-screen will not change.
• The flap goes down, and the fan speed is maximum.
• Once the target temperature reaches, the unit will return to operation as its original set to save more power.

Comfort Sleep

When you activate the "COMFORT SLEEP"button, the air-conditioning system will compensate for naturally lower night air temperatures so you can sleep in complete comfort.

• Cooling: The set temperature will automatically increase by 0.5ºC / hour for 4 hours (up to 2ºC).
• Heating: The set temperature will automatically decrease by 0.5ºC / hour for 4 hours (maximum reduction 2ºC).

Noise reduction feature

Just press the "FAN" button to show the icon, the machine will operate extremely smoothly lower than 20DB to keep the space quiet and comfortable.

Other feature

Easy-to-see remote control with bright screen backlight. (1)

Easy to use with just three simple buttons. (2)

Display text and large function buttons are easy to see and operate. (3)

• SWING button: the flap will move up and down automatically.
• FIX button: to move the flaps to the preferred position.

Note: Depending on the model, there will be from 10 - 12 positions to adjust the flap

Adjust fan speed (7 levels) ⁽⁵⁾

You can choose the right airflow through 7 fan speeds (including "HI-POWER" rapid cooling).

Install by week (6)

With its weekly timer feature, the Daikeisai air conditioner can be set up to work with four different modes a day and seven differents programs a week. Support consumers save time during updates easy and flexible.

A timer on/off (7)

The timer can program to run or stop within 24 hours at any time. The automated timer on/off is used together.

SPECIFICATIONS