Table of contents
Energy Saving
Reduce electricity bills
The models using Daikin's new Inverter technology reduce energy consumption during the cooling process.
Compared with previous non-inverter series, the new RZF-C series uses about 80% less power consumption for quick and effective cooling that reduces electricity bills.
Comparison of cooling seasonal power consumption based on average CSPF values
What is CSPF?
CSPF (cooling seasonal performance factor) is a new international energy-efficiency criterion calculated by methods stipulated in ISO 16358-1.
Benefits of Inverters
Why is inverter technology economical?
Inverter system consumes less electricity, and soon recovers the difference in initial cost. This results in lower total cost.
Inverter air conditioner can adjust its cooling capacity according to the cooling load. This results in less power consumption.
In response to fluctuating cooling load, Non inverter air conditioners repeatedly perform ON (full-power) / OFF (zero-power) operation. Inverter air conditioners, however, operate at optimal cooling capacity according to the cooling load. Since inverter air conditioners provide required minimum cooling capacity with minimum electrical power, total power consumption can be reduced during cooling period.
Inverters operate without repeated ON/OFF operation.
Why is inverter technology more comfortable?
When temperature does not fluctuate much, the set temperature is maintained.
Inverter control responds to load changes and causes minor temperature adjustments. Non-inverter control frequently turns ON and OFF in response to load fluctuations or load mismatch and causes large temperature swings.
ENDURING
Microchannel heat exchanger
Microchannel technology utilises superior heat transfer benefits of aluminium to create a more efficient air conditioner.
With a new resistance corrosion aluminium alloy, the Daikin microchannel heat exchanger becomes highly durable.
A salt spray test has been conducted to demonstrate the corrosion-resistant capability of our products in corrosive environments for a certain period of time.
Coated printed circuit boards (outdoor unit)
Coated circuit boards prevent problems caused by humidity and airborne dust. It also protects against salt contained in sea breezes.
Both sides of the PCB in outdoor units are coated.
Automatic protection against low voltage
In AM and PM peak electricity consumption periods, supply may fluctuate. Built-in low-voltage protection will automatically cut operations. When normal voltage is restored, operation will resume as before.
Outdoor unit installation is possible even with limited space.
Design Flexibility
Possible to forced OFF and ON/OFF operation using external command.
Indoor units comply with D -Net standards.
Smart Airflow Control
Indoor units can provide 3-step fine control of air volume.
Comfort ensured by ‘Auto’ airflow rate that matches load level.
Convenient energy-efficiency for stores with peak and quiet periods.
Also convenient for high ceilings and spaces with long blow distances.
360° Airflow
Airflow distribution creates uniform comfort throughout the space.
Room remains comfortable even when set temperature is raised 1℃.
Airflow gently
Maximum comfort.
Wind speed decreases 25% when the set temperature increases from 1oC to 1.5oC.
Drain pump
Equipped as standard accessory with 850 mm lift.
Silver ion anti-bacterial drain pan
A built-in antibacterial treatment that uses silver ion in the drain pan prevents the growth of slime, bacteria, and mould that cause odours and clogging. (The lifespan of a silver ion cartridge depends on the usage environment, but should be changed once every two to three years.)
Non-flocking flaps
Flaps can be detached without use of tools. Condensation does not easily form and dirt does not cling to non-flocking flaps. They are easy to clean.
Filter has anti-mould and antibacterial treatment
Prevents mould and microorganisms growing out of the dust and moisture that adheres to the filters.
Comfort Quick and Easy Installation
Comfort Quick and Easy Installation
Lightweight
All models can be installed without using a lifter.
Installable in tight ceiling spaces
Standard panel
Easy height adjustment
Each corner of the unit has an adjuster pocket that lets you easily adjust the unit's suspended height.
The outstanding features of Daikin ceiling-mounted air conditioner FCFC50DVM
- Avoid uneven temperatures and draft discomfort.
- The blowing direction distributes the temperature evenly.
- It is easy to adapt to any facility.
- Compact design, quiet operation.
- Easy and quick installation.
- Easy to maintain.
- Uniform square panel for all capacities ensures aesthetics when multiple devices are installing in the same space.
Dimensions (unit: mm)
Specifications
Note :
- Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).
- Capacities are net, including a deduction for cooling for indoor fan motor heat.
- The operation sound is measured in anechoic chamber. If it is measured under the actual installation conditions, it is normally over the set value due to environmental noise and sound reflection.