Magic Coil Technology
The new generation of Inverter air conditioners with an especial coating Magic Coil prevents dirt, bacteria, and mold from sticking to the outside of the indoor unit during operation to help the air conditioner operate more optimally, airflow cleaner, and more durable.
The effects of Magic Coil Technology with a special coating
An air conditioner is anti-fouling keeps aluminum foil clean, anti-mold, health protection, creating a clean and fresh atmosphere.
Optimal power saving.
Reduce maintenance costs as well as the number of machine cleaning times.
Plasma ion air purification technology
1. Anti-mold filter
It is the first step of protection and the high-efficiency sieve filters out dirt in the air.
2. The process of creating an ion plasma
3. Heat exchange system with Magic Clean Air technology
The heat exchanger will absorb and remove dirt through the drain. This mechanism can absorb microscopic dust particles that cannot be filtered by the filter.
Cleaning process with Magic Clean Air coating:
- Daiseikai's innovative manufacturing is an especial synthetic plastic coating on the aluminum foil heatsink device.
- Not only does this application eliminate debris, but the aluminum foil device stays clean, increases the reliability of heat transfer, and decreases the number of cleaning times required.
Creates humidity
- The tiny hydroxide (OH) molecules in the ionization process of chemicals and soil have surrounded by H2O water molecules.
- Hydroxide (OH) molecules will absorb the Hydrogen (H) of bacteria, making the bacteria paralyzed and ineffective.
- Inactive bacteria converted to H2O. This H2O molecule will spray back out to create moisture for a clean, fresh and fresh environment.
- Skin moisture increases by 10%, elasticity increases by 7%. Your whole skin will be cared for and protected by the ionizing system.
Tính năng này được tích hợp để làm khô hơi ẩm tích tụ trong máy, loại bỏ tác nhân gây ra tình trạng nấm mốc.
Once turned off, the fan will operate for 20 minutes to dry the remaining moist air. It helps to prevent mold from forming.
Active capacity options
Daiseikai proactively saves energy optimally at three levels of engine capacity:
The machine works at standard rates.
Save more energy when the machine is operating at 75% of operating capacity.
Save more energy when the machine is operating at 50% of operating capacity.
- Active energy control helps prevent overloads that cause unwanted power outages.
- When working at 50% of the rated current, the compressor works more quietly and cuts down on the noise pollution, extending product life.
Eco mode
Press the ECO button while cooling, heating, or in auto mode, the fan speed automatically controlled, and the air conditioner operates as below:
- Cooling: The set temperature will increase by 1˚C after 1 hour and then 1˚C after 2 hours and maintain until shutdown.
- Heating: The set temperature will drop 1˚C after 1 hour and then 1C again after 2 hours and maintain until shutdown.
The ECO mode achieves up to 25% less energy than standard settings without sacrificing the comfort of your home.
(**) Measured results at TOSHIBA Thailand laboratory (TCTC).
Hi Power mode
Automatically controls room temperature and airflow for faster cooling.
Just press on the "Hi-POWER" button.
- The adjusted temperature drops 3ºC lower than the set temperature. Settings on-screen will not change.
- The flap goes down, and the fan speed is maximum.
- Once the target temperature reaches, the unit will return to operation as its original set to save more power.
Comfort Sleep
When you activate the "COMFORT SLEEP"button, the air-conditioning system will compensate for naturally lower night air temperatures so you can sleep in complete comfort.
- Cooling: The set temperature will automatically increase by 0.5ºC / hour for 4 hours (up to 2ºC).
- Heating: The set temperature will automatically decrease by 0.5ºC / hour for 4 hours (maximum reduction 2ºC).
Quite operation
Just press the "FAN" button to show the icon, the machine will operate extremely smoothly lower than 20DB to keep the space quiet and comfortable.
Other features
Other feature
Easy-to-see remote control with bright screen backlight. (1)
Easy to use with just three simple buttons. (2)
Display text and large function buttons are easy to see and operate. (3)
- SWING button: the flap will move up and down automatically.
- FIX button: to move the flaps to the preferred position.
Note: Depending on the model, there will be from 10 - 12 positions to adjust the flap
Adjust fan speed (7 levels) (5)
You can choose the right airflow through 7 fan speeds (including "HI-POWER" rapid cooling).
Install by week (6)