Elegant design, fast cooling
Mitsubishi Heavy ceiling mounted air conditioning FDT71CNV-S5 (3.0 Hp) with solid and luxurious design, elegant and delicate white color, suitable for all installation spaces.
In addition, the air swing control system is independent depending on room conditions, allowing the wind direction to be independently controlled in 4 tips and quickly adjusting the airflow and preventing the wind from blowing directly on people, causing discomfort to people to use.
Balance the indoor unit when installing
Check that the access doors have removable covers at each corner; installing the indoor unit can make a balanced arrangement without removing the panel. As a result, the Mitsubishi Heavy ceiling mounted air conditioning FDT71CNV-S5 (3.0 Hp) performance is improved, and the installation time is significantly reduced.
Easy to check the drain hole
Due to the new design, users can now check the status of the water pump on the Mitsubishi Heavy ceiling mounted air conditioning FDT71CNV-S5 (3.0 Hp) without removing the panel. In addition, locating the drain hole of the water trough is easy and convenient.
Drain pump 850 mm
The drain pump is pre-installed with a pipe lift of 850mm from the ceiling surface, allowing a free layout of the pipeline. Depending on the installation location, a 185mm hose, a standard accessory, facilitates easy installation.
Control system of the louver
The louver on the Mitsubishi Heavy ceiling mounted air conditioning FDT71CNV-S5 (3.0Hp) can be controlled from high to low position independently by a wired controller. (This control system is also applicable to the FDE ceiling type)
* The remote controller and the RCH-E3 are not applicable for independent vane control.