0 Cart

Your shopping cart is currently empty

Buy now

Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases

  • Genuine nationwide warranty on site.
  • The selling price includes VAT and is committed to a genuine 100 percent NEW-WARRANTY NATIONWIDE
  • Free delivery within Ho Chi Minh City-fast installation, overtime installation as required. Support delivery and installation in the province.
  • 57 Song Hanh Street, An Phu Ward, District 2, Ho Chi Minh City (Open from 8am to 5pm, both Saturday and Sunday)
  • 32/28 No 35 St, Binh An Ward, District 2, Ho Chi Minh City, Vietnam (Open from 8am to 5pm, both Saturday and Sunday)
  • Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases
  • dienmaygiagoc.com
  • may_lanh_mitsubisshi_heavy%20(4).jpg
  • may_lanh_mitsubisshi_heavy%20(3).jpg

Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases images review

Description

Table of contents

Elegant design, fast cooling

Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases with solid and luxurious design, elegant and delicate white color, suitable for all different installation spaces. In addition, the air swing control system is independent depending on room conditions, allowing the wind direction to be independently controlled in 4 tips and quickly adjusting the airflow and preventing the wind from blowing directly on people, causing discomfort to people to use.

Balance the indoor unit when installing

Check that the access doors have removable covers at each corner; a balanced arrangement of installing the indoor unit can make without removing the panel. As a result, the performance of the Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases is improved, and the installation time is significantly reduced.

Easy to check the drain hole

Due to the new design, users can now check the status of the water pump on the Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases without removing the panel. In addition, locating the drain hole of the water trough is easy and convenient.

Drain pump 850 mm

The drain pump is pre-installed with a pipe lift of 850mm from the ceiling surface, allowing a free layout of the pipeline. Depending on the installation location, a 185mm hose, a standard accessory, facilitates easy installation.

Control system of the louver

The louver on the Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases can be controlled from high to low position independently by a wired controller. (This control system is also applicable to FDE ceiling type)

* The remote controller and the RCH-E3 are not applicable for independent vane control.

Specifications Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases
General information
Origin Brand: Japan - Made in: Thailand
Gas R410A
Type Mono - 1-way type (cooling only)
Cooling capacity 4.0 Hp - 10.4 kW
Using for rooms Area 50 - 54 m² or 150 - 162 m³ (suitable for living room, office)
Power source (Ph/V/Hz) 3 Phases, 380 - 415 V, 50Hz
Electricity consumption 2.88 kW
Refrigerant/ Liquid Pipe Diameter (mm) 9.52 / 15.88
Maximum Pipe Length (m) 50 m
Maximum Elevation Length (m) 30 m
In door unit
Model Name FDT100CSV-S5
Dimensions (H x W x D) (mm) 298 x 840 x 840 mm
Weight (Mass) (Kg) 25 Kg
Panel
Panel Dimensions (mm) 35 x 950 x 950 (mm)
Panel Net Weight (Kg) 5 Kg
Outdoor Unit
Model Name FDC100CSV-S5
Dimensions (H x W x D) (mm) 845 x 970 x 370 mm
Weight (Mass) (Kg) 79 Kg
Area and air volume calculated by room in ideal conditions, closed room, concrete wall, good insulation, no direct ventilation wc, washbasin...
Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases

Mitsubishi Heavy ceiling mounted air conditioning FDT100CSV-S5 (4.0Hp) - 3 phases review

Viewed Products
Top selling products