Daikin Multi NX duct connected indoor unit FMA50RVMV inverter (2.0Hp) Gas R32

Daikin Multi NX duct connected indoor unit FMA50RVMV inverter (2.0Hp) Gas R32, middle static pressure type. Model is combining with a 1-way outdoor and 2-way outdoor unit Multi system, model 2018 gas R32. You can see details of each model in the Daikin multi-unit air conditioner catalog. The FMA50 duct-connected system designs to meet the structural challenges of mid-to-high-end apartments, adding more intelligent functions for greater comfort and convenience.

Features of Daikin Multi NX duct connected indoor unit FMA50RVMV inverter (2.0Hp) Gas R32

- Set fan speed: The fan speed of the device can set according to user requirements.

- Auto Fan Speed: To change the room temperature to a fixed temperature, the processor automatically regulates the fan speed.

- Automatically selects cooling or heating mode based on room temperature at start-up. This function is only available for control for the BRC086A11 refrigerated 2-way system.

- Pre-humidification feature (heating mode): After thawing or when the heating operation starts, the air is heat before blowing out to avoid uncomfortable cold airflow. This function is also only available for the BRC86A21 2-way Daikin multi-system controller.

- Dehumidification function: use a medium-speed cold air stream to mix dehumidification and dry cooling operation, resulting in lower room temperatures with low humidity.

- Fan only: The only indoor fan will run while the compressor will stop cooling operation.

- The On / Off button on the FMA50RVMV indoor unit helps to turn on / off the machine manually in the remote control is lost or out of battery.

- Notice of receiving a signal.

- Backlight on the remote.

- Silver ion anti-bacterial drain pan. A built-in antibacterial treatment that uses silver ion in the drain pan prevents the growth of slime, bacteria, and mold that cause odors and clogging. (The lifespan of a silver ion cartridge depends on the usage environment, but should be changed once every two to three years.)

- 72h On / Off Timer: This timer can set: run or stop the machine at any time within 72 hours.

- Automatic on/off timer: Automatically turns on / off the air conditioner according to the setting time.

- DIII-net control (optional): Connects to an existing central control system without needing to add an optional adapter.

- Automatically restart when power failure.

- Self-diagnostic error: Error codes are displayed LCD on the remote controller for quick and easy diagnosis and repair.

- Drain pump: The pipe has a slope for more efficient condensate drainage. Especially useful for the long pipes.

Specifications