Table of contents
Super Multi NX Technology
1. Smooth Airflow
Saw edge fan blade - Experience the true tranquility from the advanced blade design. The additional saw-tooth edge at the rear of the blade smoothens airflow over the blade’s surface and reduces turbulence, resulting in a peaceful environment for your living space.
2. Quite and Comfortable
Swing compressor - Noise disturbance is no longer your concern. Daikin has developed powerful swing compressors with a high-pressure dome and lubricant oil, enabling the engine to run smoothly, quietly, and efficiently.
3. Energy Saving
Reluctance DC motor - With the latest technology, all super multi NX compressors are equipped with reluctance DC motors that incorporate the use of magnetic torques or neodymium magnets with reluctance torques, resulting in a maximum energy efficiency.
4. Better Performance
Inverter technology - The inverter PCB operates in a similar way to the accelerator of a car, which can gently increase or decrease power. It ensures that your desired temperature can be reached faster and can be maintained constantly without any fluctuations.
5. Enhance Efficiency
Expansion valve – Daikin’s smart refrigerant control technology presents a newly designed EV valve that is more powerful yet cost-saving. It enhances the inverter’s performance and controls the refrigerant usage more effectively by up to 80%.
Super clean filter that care for your health
While the filter’s micron-level fibers trap dust, the titanium apatite effectively adsorbs odours and allergens and acts as a deodoriser. This filter delivers a consistent performance for approximately three years if it is washed with water every six months.
The advance of Daikin Multi NX duct connected indoor unit CDXM50RVMV inverter (2.0Hp) - Gas R32
- Beautiful interior.
- Super Powerful Operation*.
- 0.5oC adjustable temperature*.
- Backlight remote controller.
- Fan speed can be set to correspond to your pre - ferred comfort level.
*Available with wireless remote control.
The outstanding features of Daikin Multi NX duct connected indoor unit CDXM50RVMV inverter (2.0Hp) - Gas R32
Comfort Control
Set fan speed: Fan speed can be set to correspond to your pre - ferred comfort level.
Comfortable auto fan speed: Automatically dehumidify and adjust the room temperature to your desired temperature.
Indoor Unit Quiet Operation: Indoor unit’s operating sound pressure levels are decreased from the low-setting fan speed using the wireless remote control.
Outdoor Unit Quiet Operation: Outdoor unit’s operating sound pressure levels are decreased from the rated operation sound using the wireless remote control.
0.5oC adjustable temperature: Temperature can be increased or decreased by + - 0.5 °C to customize to your level of comfort.
Auto cooling & heating: This function automatically selects cooling or heating operation mode based on the room tem - perature at start-up. This function is available with the heat pump type.
Hot-Start Function (Heating): After defrosting or when starting the heating operation, air is pre-heated before being dis - charged in order to prevent uncomfortable cold draft. This function is available with the heat pump type.
Dry cooling: This function combines dehumidifying and cool - ing operation dehumidifiers by cooling at a low airflow rate, resulting in a lower room tempera - ture with low humidity.
Fan only: The microprocessor automatically controls fan speed to adjust room temperature to the set temperature.
Lifestyle Convenience
Super Powerful Operation: This function boosts cooling or heating performance for 20 minutes when wanting to quickly change the room temperature.
Econo Mode: This mode limits the maximum running current and power consumption to prevent circuit break - ers from being overloaded.
Indoor Unit On/Off Switch: the unit can be started manually for convenience.
Signal Reception Indicator.
Back light remote control.
Health & Hygienic
Titanium apatite deodorizing filter: This filter decomposes odours and even removes bacteria and viruses, which can be achieved sim - ply by exposing the filter to sunlight once every 6 months.
Remote Controller / Timers
24-Hour On/Off Timer: Sets the on/off timer 24 hours in advance to start/stop the operation.
On/Off timer automatically: Switches the air conditioner on/off at night or in the morning.
Night Set Mode: Adjusts the temperature to prevent excessive cooling or heating for a pleasant sleep.
DIII Net (optional): Connection to the centralized control system is available without the need for optional adaptors.
Worry Free
Auto-Restart: Automatically operates the air conditioner according to the recent setting after power failure is restored.
Self-Diagnosis: Multi-function codes are displayed on the wireless remote control for fast and easy maintenance.